Gtechniq · accredited installer
Gtechniq ceramic coating on painted and chrome surfaces, on top of the full Platinum Motorcycle Detail. Long-term gloss, water beading and a bike that cleans up in minutes after a ride.
Gtechniq Accredited Installer
Professional coatings, not retail
CARFAX-verified service shop
Gtechniq accredited
3M Scotchgard Pro Series
Paint protection film · from $695
17+ years, owner-operated
Licensed, insured & bonded
Short answer
$599 starting, and it includes the full Platinum Motorcycle Detail — wash, decontamination and a machine polish pass — before the Gtechniq coating goes on. The detail on its own is $399.
What is included
Every motorcycle coating starts with the full Platinum detail before a single drop of coating goes on.
Included
Included
Wash, decontamination, degrease and a machine polish on paint and chrome. The surface the coating bonds to.
Best for: Every coated bike.
Get a quote →The coating
$599starting
Gtechniq coating applied to painted and chrome surfaces by an accredited installer, in the shop.
Best for: Riders who want the bike to stay finished.
Get a quote →Paint and chrome
Bugs, road grime and brake dust bond to an uncoated bike. They slide off a coated one.
It gives the paint and chrome a hard, slick, hydrophobic surface. Bug splatter, road film and grime do not bond as easily, so a rinse and a wipe does what used to take scrubbing. The gloss holds through the riding season rather than fading with every wash.
On a bike, where so many surfaces are small and fiddly, easier cleaning is most of the point.
Yes. The coating goes on painted and chrome surfaces alike, after both have been polished in the Platinum detail. Chrome that has been coated stays bright longer and water-spots less.
Tell us about bare metal, raw aluminium or powder coat when you book so each surface gets the right treatment.
A properly prepped Gtechniq coating is built to hold up for a full riding season and beyond. Exact longevity depends on storage and how often and how hard the bike is ridden.
A bike kept covered or garaged over winter holds a coating far longer than one left outside.
In the bay
Real ST6 motorcycle work.
What customers say
Pulled from the Google Business Profile for this address on 19 September 2026. Quoted word for word — we do not write them, edit them or filter them.
“The best service I’ve recieved in years!”
Google review · ST6 Detailers, N Nevada
“Honest, hard working, experienced, and priced right.”
Google review · ST6 Detailers, N Nevada
Gtechniq Accredited Installer
17+ years · professionally trained · Gtechniq accredited
A motorcycle is not a car scaled down. The accreditation standard Gtechniq requires for coatings applies to every bike, and every film install is 3M.
Small panels, chrome, bare metal and paint on one machine. Every one needs different handling.
Verified by CARFAX · accredited by Gtechniq
17+
Seventeen-plus years of professional detailing. Reading a surface before touching it is the part of the job that experience buys, and it decides every step after it.
Motorcycles are in-shop work at 2725 N Nevada Ave, on a stand, in controlled light.
Each surface gets the right product. What is safe on paint is not always safe on bare metal or powder coat.
A local, family-run shop — Dana Starr, his two sons and a crew he has worked with for years. Licensed, insured and bonded. The same people quote the job and do the job.
Around the coating
Coating and film do different jobs and work together.
3M film · quoted
A coating makes the bike easy to clean. It does not stop a rock. 3M film on the tank and fairings does.
From $199
Wash and wax, Gold or Platinum, if you are not coating this season.
Where we work
Motorcycles are worked on in the shop at 2725 N Nevada Ave.
Motorcycle detailing, bike detailing, chrome polishing and motorcycle ceramic coating are one trade: a machine with far more exposed surfaces than a car and a lot of small places to get into. We work on cruisers, touring bikes, sport bikes, adventure bikes and customs.
Front Range riding means bugs on the fairing, sand and mag chloride on the lowers in spring, and sun at altitude on a painted tank all summer.
Tell us the make, model and what it needs. You get a real price before you bring it in.
ST6 Detailers — North Nevada
2725 N Nevada Ave
Colorado Springs, CO 80907
El Paso County, Colorado
Motorcycle coating questions
Answered straight. If yours is not here, call the shop and ask.
$599 starting, and it includes the full Platinum Motorcycle Detail — wash, decontamination and a machine polish pass — before the Gtechniq coating is applied.
It goes on painted and chrome surfaces. Tell us about powder coat, bare metal or raw aluminium when you book so each surface is handled correctly.
A properly prepped Gtechniq coating is built to last a full riding season and beyond; exact longevity depends on storage and use.
If the tank and fairings take chips or boot scuffs, yes. Film stops impacts; the coating makes everything easier to clean, and it can go over the film.
In the shop at 2725 N Nevada Ave, by an accredited installer.
Ready when you are
Make, model, and whether it lives in a garage.
We will confirm the $599 price for your bike and book it in.
ST6 Detailers — North Nevada · 2725 N Nevada Ave, Colorado Springs, CO 80907 · (719) 517-7220
Open 7 days · Mon–Sat 6am–8pm · Sun 8am–6pm
5.0★★★★★17 Google reviews
Licensed, insured & bonded
No deposit to book. You pay after the work is finished and you have looked at it.
Dana Starr has been detailing in Colorado Springs for 17+ years. He runs this shop with his two sons and a crew he trusts. Every job gets looked at before it goes back to you.
Gtechniq AccreditedAccredited installer in El Paso County