Chalky, dull, weathered paint doesn't have to stay that way. ST6 removes oxidation and machine-polishes aircraft skin back to a clean, consistent finish, then preps it for wax, sealant, or ceramic coating.
The same verified standard behind every ST6 correction and polishing job.
★★★★★Dana Starr is an expert in his field. The work came out perfect. If you are in need of any detailing, I highly recommend ST6.
★★★★★These guys came to me and did a great job! Communicated well, exceeded my expectations for the scope of work and price we had discussed.
Pick your aircraft type and the paint condition it's in. This is a starting point — send photos for the exact quote.
A bit more surface area and typically a composite skin, which takes slightly longer to correct.
Machine polish that cuts through oxidation and restores a dull, chalky finish to a consistent, even shine. Right for aircraft that have sat on the ramp and lost their luster.
Final pricing depends on aircraft size and paint condition — send photos and we'll confirm the exact quote fast.
Choose the level of finish work your aircraft skin actually needs.
Real work from the ST6 mobile fleet — not stock photography.
Wax & Polish
Aviation Detailing
Exterior Wash & Polish
Mobile Aircraft Detailing17+ Years of Experience. Professionally Trained. Gtechniq Accredited.
Correction and polishing prep follow the same accredited standard we use before every ceramic coating job. Inspection, decontamination, correction, application technique, and cure procedure all determine the finished result. ST6 is a Gtechniq Accredited Installer serving Colorado Springs and El Paso County.
×
ST6 DETAILERS
More than 17 years in professional detailing gives us the real-world knowledge to evaluate paint, clear coat, and composite finishes before correction begins.
Our accreditation demonstrates that ST6 completed the training and standards required to professionally correct and prep aircraft-grade finishes — not a certificate bought off a shelf.
Accreditation provides access to professional-grade Gtechniq correction and polishing systems not equivalent to consumer products bought online.
You know exactly who's working on your aircraft's finish. ST6 Detailers is an established, local, family-operated company serving Colorado Springs and El Paso County.
Mobile service for Colorado Springs Airport hangars and FBO ramp access, when clearance allows.
Mobile service for Colorado Springs Airport hangars and FBO ramp access, when clearance allows.
Single-engine aircraft, turboprops, and private jets — Cessna, Cirrus, King Air, Citation, Gulfstream, and more.
Gtechniq application standards confirmed, with surface prep discipline that carries through to every polish and correction step.
What owners ask before booking correction work.
Sun exposure, altitude, and time all break down clear coat and paint finishes over years of flying and tie-down storage, leaving a chalky, dull surface.
Most oxidation responds well to machine polishing. Severity varies by aircraft — send photos and ST6 will give you an honest assessment before quoting.
It's a good idea. Coating locks in the corrected finish and slows the return of oxidation, but it's optional and quoted separately.
Aircraft paint restoration is scheduled through ST6 Detailers at 512 Cooper Ave, Colorado Springs, CO 80905, and the work is done on site at the hangar or ramp. Call or text 719-517-7220 with the aircraft type and where it is parked.
Water, power and equipment on board. Book online or call and we will match the package to what your vehicle actually needs.
Dana Starr has been detailing in Colorado Springs for 17+ years. The mobile crew brings the water, power and equipment to your driveway, office or storage lot, and every job gets checked before we pack up.
Gtechniq AccreditedAccredited installer in El Paso County