
Swirls from the dealer prep wash
Before delivery most cars get a quick wash and dry from the lot crew, often with shared mitts and towels. On dark paint that shows up as a fine spider web the first sunny day you own it.
New-car paint can have wash swirls and delivery contamination; we inspect and test before choosing correction. We come to homes, apartments and workplaces across Phoenix and the East Valley with our own water and power. Paint condition and safe clear-coat limits determine the work, not a promise that every scratch disappears.
Google rating across ST6’s five business profiles. This is the overall business rating, not a rating for this individual service.



Because a lot happens to it before you get the keys. It rides a truck or a train, sits on the lot, and gets washed and wiped by whoever is on prep that day.
Most of that leaves fine marks in the clear coat. A ceramic coating is clear, so whatever is on the paint when it goes on is what you’ll be looking at for the next three to nine years.
Every coating we do starts with decon, clay and correction, new cars included. The 5- and 9-Year get a full correction, the 3-Year gets a two-step. It’s part of the coating price, so you won’t see it added on later.
Usually light swirls from the dealer’s prep wash, some buffer marks, scuffs around the door handles, and rail dust from shipping. You won’t see much of it under showroom lights. Put a flashlight on it and it shows up.

Before delivery most cars get a quick wash and dry from the lot crew, often with shared mitts and towels. On dark paint that shows up as a fine spider web the first sunny day you own it.

A quick machine buff to “freshen up” a lot car leaves wavy trails you only see in direct sun.

Every walk-around, test drive and key hand-off touches the same panels.

Showrooms use big soft lights on purpose. They make every car look perfect.

Before any polisher touches a new car we put it under the lights and go panel by panel. Lower doors, rockers and the area behind the wheels pick up the most. If your paint is clean, we’ll tell you, and we do less.
New cars travel by rail and open carrier. Brake dust and iron fallout from the trip settle on the paint and bond to it. The bag test: put your hand inside a thin plastic sandwich bag and glide it across the hood.
If it feels like fine sandpaper instead of glass, it’s contaminated, and polishing over it would grind that grit into the paint. That’s why an iron decon and a clay bar come before any correction.
Grab your phone flashlight, check the flat panels first, then walk around panel by panel. It takes about five minutes. Do it before you sign, while the car is still the dealer’s.

Direct sun, or your phone flashlight in shade. Hold it close and move it slowly. Swirls show as circles around the light.

Flat panels show it first. Look at a reflection: crisp edges mean clean paint, a hazy halo means marring.

Doors, handles, lower panels and bumper corners. Photograph anything you find and write it on the delivery sheet.
If you’re planning a coating, tell the dealer you don’t need the car washed before pickup. That quick wash is where a lot of new-car swirls come from. A little lot dust is easy for us to deal with. Fresh wash marks aren’t.
Usually a light one, less than a used car needs. It’s rare that a new car needs none. We measure every panel with a paint gauge first and take off as little as we can.

Because a coating bonds hard to whatever is under it. Fixing swirls afterward means polishing the coating off and recoating, so the paint gets fixed first.

It adds gloss and makes washing easier. It won’t hide swirls. If anything, the extra gloss makes them easier to see.

It cures hard on whatever surface it touches. Fixing a swirl later means cutting through it and recoating.

Every ST6 coating is registered on the vehicle’s Carfax with a nationwide warranty. Better to have that record start with clean paint.
Plenty of people coat their own cars, and that’s great. The prep is what makes it last, so do it in this order. The full walkthrough is in our paint correction guide.
Other questions we get from new owners.



Paint correction · Inspection before polishing
ST6 Detailers · Family operated · Arizona service
ST6 brings 20,000+ hours of polishing experience to vehicles in Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Paint inspection, contamination removal and a test section guide the correction approach. We choose the work for the finish and defect depth rather than promising every scratch can be removed.
× Gtechniq

Our polishing experience is applied to assessing swirls, haze, oxidation and other paint defects. Inspection and a test section help determine the correction level appropriate for the vehicle.
Washing and decontamination come before machine polishing. Mineral deposits and bonded contamination are assessed first so a mark is not treated as a reason for unnecessary aggressive compounding.
Light enhancement and multi-stage correction are different services. Paint condition and the selected scope determine the work; deep damage may remain where further removal would be inappropriate.
Dana Starr, his sons and a long-time crew serve Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Ask us about your vehicle or vessel, its condition and the specific service you need.
Service details, protection options and booking answers for Phoenix, Chandler, Gilbert, Tempe and Scottsdale.
Yes. Dealer prep washes, lot handling and transport leave fine swirls and contamination on new paint, and a ceramic coating is clear, so it locks in whatever is underneath. At ST6 every coating starts with decon, clay and correction, new cars included.
Use one hard light: direct sun, or a phone flashlight held close in shade. Swirls show as fine circles around the light, and reflections on the hood look hazy instead of crisp. Check flat panels first, then doors, handles and lower panels.
If you plan to coat it, ask them to skip the courtesy wash. It is the most common source of swirls on a car with delivery miles. Light lot dust comes off safely in a proper decon wash.
Usually less than a used car, but rarely none. We gauge every panel and remove as little clear coat as it takes. Our 3-Year Gtechniq coating includes a two-step correction; the 5-Year and 9-Year include full correction.
No. Decon, clay and paint correction are included in every ST6 Gtechniq coating price: 3-Year from $899, 5-Year $1,099 and 9-Year Crystal Serum Ultra $1,599. There is no deposit, and you pay after the work is done.
As soon as you can. Factory paint is fully cured, so there is nothing to wait for, and every week of driving adds wash marks, bug and bird etching and, in a Arizona winter, mag chloride film. The 3-Year and 5-Year take one day; the 9-Year takes two.
Decon, clay and paint correction are included in every term.
3-Year · EXO v5$899 starting · 1 day 5-Year · Crystal Serum Light$1,099 starting · 1 day 9-Year · Crystal Serum Ultra$1,599 package · 2 days Film, tint or interior?Request a quote — we confirm on your vehicle Every other serviceBook online · pick your time Call to book(480) 359-7117Include the vehicle, the city it’s in and what you want done. The nearest location replies with the right service and an open time.