
Wash & Protect
- Hand wash & rinse
- Non-skid scrub
- Vinyl UV protectant
- Spray sealant finish
Best for: Boats washed regularly through the season with no visible chalking or oxidation.
Calculate your boat’s price →
Boat exterior and interior detailing, with polishing and marine-coating options matched to the surface. We service accessible boats at driveways, storage lots or approved dock locations around Phoenix and the East Valley. Tell us the length, condition and access for a service quote.
Google rating across ST6’s five business profiles. This is the overall business rating, not a rating for this individual service.


Pick your boat type, exterior and interior service level, and length — get a real number in seconds. Book both exterior and interior and save 10%. Send photos and we'll confirm the exact quote fast.
Hand wash, non-skid scrub, vinyl UV protectant, and a spray sealant finish — routine maintenance for boats washed regularly through the season.
Prices are estimates. Pick exterior + interior to unlock a 10% bundle discount. Send a few photos and we'll give you an exact quote — usually same day.
Each tier increases the depth of correction. Most boats fall into Tier 1 or 2 — Tier 3 handles severe oxidation.
Fiberglass gel coat behaves differently than automotive paint — it oxidizes fast under constant sun and water exposure, turning chalky and dull within a season or two of neglect. The tier you need depends on how long it's been since the hull was last corrected; each card below spells out exactly which condition it's built for.

Best for: Boats washed regularly through the season with no visible chalking or oxidation.
Calculate your boat’s price →
Best for: Hulls that have gone a full season or more without polishing and are starting to look dull.
Calculate your boat’s price →
Best for: Chalky, visibly oxidized gel coat that needs to be corrected before ceramic coating will bond.
Calculate your boat’s price →A boat interior takes what a car interior never does — sunscreen, fish residue, bait, mold from trapped moisture, and vinyl baking in direct sun all season.
Trapped moisture is the real enemy of a boat interior — bilge areas, storage compartments, and carpeted decks stay damp long after the boat's out of the water, which is exactly the environment mold and mildew need to take hold. Each tier below is scoped to a different stage of that problem.

Best for: Routine end-of-season or pre-trip interior refresh with no odor or mold issues.
Calculate your boat’s price →
Best for: Boats with vinyl seating that's starting to fade, crack, or feel stiff from sun exposure.
Calculate your boat’s price →
Best for: Interiors with a musty smell or visible mold in compartments after storage or trapped moisture.
Calculate your boat’s price →Marine ceramic coating isn't the same as automotive. Boats face direct water contact, UV from above and below, and temperature swings that break down inferior coatings fast.
As Gtechniq accredited applicators, we prep the surface correctly — full decontamination, correction, panel wipe — before a single drop goes on. The result bonds at the molecular level and lasts years, not months. Starting at $1,200, final quote confirmed after inspection.
See Boat Ceramic Coating Details17+ Years of Experience. Professionally Trained. Gtechniq Accredited.
Boat owners need to know who's touching the gel coat before correction or coating work starts. Inspection, decontamination, correction, application technique, leveling, and cure procedure all determine the result — a premium coating installed incorrectly is still an incorrectly installed coating. ST6 is a Gtechniq Accredited Installer serving Phoenix and Phoenix metro area.
×
ST6 DETAILERS
More than 17 years in professional detailing gives us the real-world knowledge to evaluate gel coat, fiberglass, and aluminum hulls before a coating ever goes on.
Our accreditation demonstrates that ST6 completed the training and standards required to professionally install Gtechniq protection systems on marine-grade surfaces — not a certificate bought off a shelf.
Accreditation provides access to professional-grade Gtechniq coating systems and installation knowledge not equivalent to a consumer product bought online.
You know exactly who's working on your boat. ST6 Detailers is an established, local, family-operated company serving Phoenix and Phoenix metro area.
Boat service for owners in Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Tell us where the boat is kept so we can arrange suitable access and working conditions.
Boat service for owners in Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Tell us where the boat is kept so we can arrange suitable access and working conditions.
Fiberglass, gel coat, and aluminum hulls — correction and coating matched to the surface, not a one-size approach.
Gtechniq application standards confirmed, with surface prep discipline and post-install cure guidance included.


Marine gel coat oxidizes differently than automotive paint — it's thicker, more porous, and reacts harder to UV at altitude.
Marine-safe wash, waterline treatment, non-skid scrub, and full rinse.
Removes mineral deposits, algae residue, and embedded lake contaminants from gel coat pores, when needed.
DA for light oxidation. Rotary and heavy compound for severe. Wet sanding on the worst sections.
Locks in the restoration. Gtechniq accredited ceramic coating lasts 3–5 years on marine surfaces.
Arizona boats oxidize faster than coastal boats. We come to your lake, dock, or storage lot.
ST6 serves Phoenix, Chandler, Gilbert, Tempe and Scottsdale.
ST6 serves Phoenix, Chandler, Gilbert, Tempe and Scottsdale.
MasterCraft, Sea Ray, Malibu, Cobalt, Chaparral, Supra, Moomba, Heyday, Tracker, Lund. Fiberglass gel coat, painted hull, and aluminum.
Marine detailing · Surface-specific care
ST6 Detailers · Family operated · Arizona service
ST6 provides boat detailing for owners in Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Marine care means assessing gelcoat, marine paint, vinyl seating and other fitted surfaces separately. We match washing, oxidation removal, polishing and protection to the selected boat service rather than treating a boat like a passenger car.
× Gtechniq

17+ years of professional detailing experience inform our inspection and preparation. For a boat, the starting point is its finish, oxidation and the condition of the surfaces being cleaned.
Gtechniq Marine Ceramic Base and Marine Ceramic Top are designed for gelcoat and marine paint. They are coating options, not automatic inclusions in every boat wash or interior detail.
Gtechniq Marine products ↗Exterior gelcoat, deck areas and vinyl seating call for different tools and products. We explain the selected work and assess oxidation before recommending additional polishing or protection.
Dana Starr, his sons and a long-time crew serve Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Ask us about your vehicle or vessel, its condition and the specific service you need.
Service details, protection options and booking answers for Phoenix, Chandler, Gilbert, Tempe and Scottsdale.
Wipe your hand across the hull in direct sunlight. If it stays clean, Tier 1 keeps it that way. If chalk transfers to your hand, you need Tier 2 or Tier 3 depending on how heavy the buildup is — send photos and we'll confirm before you book.
Correction removes the existing oxidation, but gel coat will oxidize again over time without protection. That's why we recommend sealant or ceramic coating right after correction to slow the return of chalking.
Starting at $12.50/ft — a 25 ft boat starts around $313 for Wash & Protect. Polish & Seal runs $15.63/ft, Heavy Correction $24.41/ft. Interior service is priced separately by the foot, and booking both exterior and interior unlocks a 10% bundle discount. Ceramic coating starts at $1,200. Use the calculator above for your exact estimate.
In most cases yes, unless the gel coat has worn completely through or is crazed. We use rotary correction, heavy compound, and wet sanding on the most severe cases, and always run a test panel first.
All brands, including MasterCraft, Sea Ray, Malibu, Cobalt, Chaparral, Supra, Moomba, Heyday, Tracker, and Lund. All hull types: fiberglass gel coat, painted hull, and aluminum. Ski boats, wake boats, pontoons, fishing boats, bowriders, and deck boats.
Once per season minimum for boats stored outdoors. Arizona's altitude accelerates UV damage, so boats oxidize faster than at lower elevations. A Gtechniq ceramic coating after correction extends protection to 3–5 years.
A dual-action (DA) polisher is safer and ideal for light to moderate oxidation. A rotary polisher cuts more aggressively and is required for severe oxidation. Knowing which to use, and when to switch, is what separates a proper correction from surface damage.
ST6 serves Phoenix, Chandler, Gilbert, Tempe and Scottsdale. Include your boat type, length, condition and Arizona location in the request. Call or text (480) 359-7117 to arrange the service.
Include the vehicle, the city it’s in and what you want done. The nearest location replies with the right service and an open time.