Source: Google · North Nevada ↗I wanted to get my brand new 2026 Ford F-150 undercoated to help protect the frame and undercarriage from rust and corrosion, especially with Colorado winters. I heard these guys use Fluid Film, so I decided to give them a try. Brought my truck in and they did the entire undercoating for $350. Phenomenal job! They were thorough, knew exactly what they were doing, and the price was very reasonable. Definitely recommend these guys if you’re looking to protect your vehicle long-term.
Fluid Film undercoating. Phoenix, Arizona.
Fluid Film for Phoenix fleet vans, work trucks and high-mileage daily drivers. Installed at ST6’s Tempe bay, about six miles east of Sky Harbor. From $325; fleet pricing by quote.
What do ST6 customers say? 4.8 stars on Google.
Selected ST6 customer reviews relevant to this service. Rating and total review count cover ST6’s five Google Business Profiles.
Source: Google · North Nevada ↗They did an exceptional job putting Fluid Film on my new 2026 4runner. Definitely worth it when protecting your investment. They were timely and also gave great customer service. I will definitely use them again in the future


Phoenix work vehicles can’t afford rust downtime.
Plumbing, HVAC and delivery vans log big Phoenix miles and get washed hard. Fluid Film is a low-cost way to protect the frames, crossmembers and rear doors that hold the business together, and it goes on in one day.
1817 E Rio Salado Pkwy, Tempe, AZ 85288 · across from Tempe Marketplace · Tue–Fri 10 AM–6 PM · Sat 10 AM–4 PM · Text (480) 359-7117
Fleet-friendly
Text the makes, models and count. Vans are $375 each for Fluid Film, and multiple vehicles can be scheduled on back-to-back days.
Fluid Film, Phoenix style.
HVAC and plumbing vans
Rear-door bottoms, step bumpers and ladder-rack mounts.
Rideshare and delivery cars
High-mileage cars that see every monsoon puddle in the city.
Older daily drivers
Keep a paid-off car on the road longer.
Know the area? Here’s the plan.
Sky Harbor drop-off
About six miles west of the bay. Drop off on the way out, pick up on the way back.
Monsoon dip crossings
Low crossings flood every summer; Fluid Film keeps that water off bare steel.
I-10 and Loop 202
The route east from downtown to Rio Salado Parkway.
Fluid Film undercoating. How the service works.
Choose a stage to see the preparation, service and final review. Photos show separate examples, not a matched before-and-after.

What happens during the appointment?
Assess the accessible underside
ST6 checks accessible underside condition and existing coatings before confirming the preparation and service scope.
See fluid film undercoating pricingUnderbody inspection & preparation before service.
Photos show separate vehicle examples.


What this service includes
Five key service steps
- Lift the vehicle and assess accessible underbody condition
- Remove all four wheels for Fluid Film preparation
- Complete underbody degreasing and appropriate iron-removal treatment
- Use air, steam, compatible chemicals and tools; prepare and dry as required
- Apply corrosion protection to suitable prepared areas and inspect coverage
Undercarriage cleaning & undercoating work from ST6.



Photos show separate vehicle examples.
See service pricing →Fluid Film by city. One Tempe bay.
Fluid Film questions. Phoenix, Arizona.
Price, timing and how Fluid Film works, for Phoenix drivers.
Where can I get Fluid Film in the Phoenix area?
At ST6’s underbody bay, 1817 E Rio Salado Pkwy, Tempe, about six miles east of Sky Harbor and across the street from Tempe Marketplace.
Do you do fleet Fluid Film in Phoenix?
Yes. Vans are $375 each, mid trucks $350 and full-size trucks $375. Text the makes, models and number of vehicles to (480) 359-7117 for a schedule.
How long is a van out of service?
About a day. Drop off at 10 AM; the van is usually ready by close.
Is Fluid Film worth it on an older car?
Yes, if you plan to keep it. Loose rust is cleaned and iron-treated, then the film slows it down. Perforated metal is assessed first.
Is Fluid Film safe around wiring and sensors?
It is applied to the frame, suspension and body structure. Exhaust, brakes, sensors and electrical connectors are kept clear.
How often should a work van get Fluid Film?
Once a year for most vans. Vans that are pressure-washed weekly may need exposed areas touched up sooner.
What does your vehicle need underneath? Pick yours.
Every model rusts in its own places. Phoenix drivers bring theirs to the Tempe bay; each page covers the generations, the spots we work on and the trips that put salt, sand or water under it.
Tell us about the vehicle. We’ll route it to the right team.
Include the vehicle, the city it’s in and what you want done. The nearest location replies with the right service and an open time.
