ST6 Detailers · Tempe bay · Arizona

GMC Sierra undercoating in Tempe. Frame, rockers, cab corners.

Same GM frame as the Silverado, plus rockers and cab corners. For Sierras that see I-17 to Flagstaff, Canyon Lake ramps or Rocky Point. Fluid Film from $325, Woolwax from $450. No deposit.

Google reviews

What do ST6 customers say? 4.8 stars on Google.

Selected ST6 customer reviews relevant to this service. Rating and total review count cover ST6’s five Google Business Profiles.

KMA HomesGoogle review
2026 Ford F-150 · Fluid Film undercoating

I wanted to get my brand new 2026 Ford F-150 undercoated to help protect the frame and undercarriage from rust and corrosion, especially with Colorado winters. I heard these guys use Fluid Film, so I decided to give them a try. Brought my truck in and they did the entire undercoating for $350. Phenomenal job! They were thorough, knew exactly what they were doing, and the price was very reasonable. Definitely recommend these guys if you’re looking to protect your vehicle long-term.

Source: Google · North Nevada ↗
Ricardo HernandezGoogle review
2026 Toyota 4Runner · Fluid Film undercoating

They did an exceptional job putting Fluid Film on my new 2026 4runner. Definitely worth it when protecting your investment. They were timely and also gave great customer service. I will definitely use them again in the future

Source: Google · North Nevada ↗
CARFAX Gtechniq Accredited badge
Gtechniq Accredited InstallerProfessional surface care
ST6 Detailers logo
Family owned & operatedDana Starr & sons
GMC Sierra · what we look for

When does an Arizona Sierra need it? When it leaves the Valley.

Daily Valley driving is dry; a Sierra picks up rust on trips like I-17 to Flagstaff. The Sierra rides on the same GM frame with the same wax-based coating, and owners report the same early frame rust. We take all four wheels off, degrease, and film the frame inside and out.

  • $325–$375Fluid Film by size
  • $450–$675Woolwax by size
  • About 6 hrsday drop-off
  • Tempe bayacross from Tempe Marketplace

Same frame as the Silverado

The Sierra rides on the same GM frame with the same wax-based coating, and owners report the same early frame rust. We degrease it and put a real film over it.

Rockers and cab corners

Owners of 2014–2018 GM trucks watch rockers and rear wheel wells go first. We open the factory holes and film inside the rockers and cab corners, not just the frame.

Moved here from a salt state

Plenty of Valley Sierras came from the Midwest with rockers and rails already started. We assess, film to slow it, and flag anything already weak.

Inside the boxed rails

Valley dust packs inside the frame and holds dew after a monsoon storm. We wand film through the factory openings from cab to bumper.

Brake and fuel lines

Steel brake and fuel lines run the length of the frame. Every line gets film; anything already weak gets flagged before we coat.

Hitch, hangers & spare

Denali and AT4 owners tow. The receiver, rear spring hangers, shackles and spare hoist all sit in spray and get worked with film.

Kept off your Sierra: brake rotors and pads, the exhaust and catalytic converter, and lug nuts; its rubber bushings and boots get masked, since Fluid Film can swell non-oil-resistant rubber.

GMC Sierra by generation

Which Sierra do you have? Here’s what each one hides.

What’s under a Sierra changes by generation. Find your years, then see what owners find underneath.

GMC Sierra generations and underbody weak spots
YearsGenerationBuilt asWhat owners find
1999–2006GMT800Boxed front, open rear frameBrake lines and rear frame scale
2007–2013GMT900Boxed frameRear frame rust by the tank and rockers going soft
2014–2018K2XXWax-coated frameRockers and rear wheel wells go first
2019–todayT1XX (AT4, Denali)Wax-coated frameEarly frame rust reported over GM’s wax
At the Tempe bay

How does a Sierra get prepped? Wheels off first.

Same standard on every vehicle. Full Fluid Film process →

Surface rust on a rear axle housing, assessed on the lift before undercoating at ST6 Tempe, Arizona
01

Lift and assess

Wheel removed to expose the wheel well and suspension before Fluid Film, ST6 Tempe, Arizona
02

Four wheels off

Citrus degreaser applied to an underbody before undercoating, ST6 Tempe, Arizona
03

Degrease and iron treatment

Pressure washing grime off a Jeep underbody before undercoating, ST6 Tempe, Arizona
04

Wash, steam and dry

On the lift · Tempe bay

Where do we work on a Sierra? Four places, every time.

Beyond the full frame, these are the spots we spend the most time on with a Sierra.

01

Inside rockers & cab corners

Through the factory holes, both sides, full length.

02

Frame over GM wax

Degrease the wax and film the frame inside and out.

03

Hitch & rear hangers

Receiver, hangers, shackles and the spare hoist.

04

Lines along the frame

Brake and fuel lines, cab to bumper.

At the Tempe bay · final steps

Then the film goes on your Sierra. Coverage checked.

Every treated area gets checked before your Sierra goes home.

Pressure washing grime off a Jeep underbody before undercoating, ST6 Tempe, Arizona
04

Wash, steam and dry

ST6 technician spraying corrosion protection on a lifted vehicle's underbody, Tempe, Arizona
05

Apply Fluid Film

Front underbody and suspension with protective coating, inspected on the lift at ST6 Tempe, Arizona
06

Inspect coverage

Sierra owners around the Valley

Where does your Sierra pick it up? Trips we hear about every week.

The drives that put salt, sand or water under a Sierra in Arizona.

01Ski and cabin weekends

I-17 to Flagstaff

ADOT deicer reaches the rockers and cab corners on the climb.

02Towing the boat

Canyon Lake ramps

Ramp water soaks the hitch, hangers and spare hoist.

03Beach weekends

Rocky Point

Salt sand packs the rockers and rear rails.

Choose your film

Fluid Film or Woolwax for your Sierra? Our call:

Woolwax for tow rigs and AT4s that see trails; Fluid Film for daily drivers checked every fall.

Quick answers

Sierra undercoating questions.

Still unsure? Call or text (480) 359-7117 or send a request with your Sierra’s details.

How much does GMC Sierra undercoating cost in Tempe?

For a GMC Sierra, Fluid Film is $325 for a car or crossover, $350 for a midsize truck or SUV, and $375 for a full-size truck, SUV or van, with wheels-off prep included; Woolwax runs $450, $550, $600 and $675 for the same sizes.

Do Sierra Denali and AT4 trucks get the same treatment?

Yes, plus extra time on the AT4's skid plates and the Denali's running boards. Air-suspension parts and bushings get masked.

Why film inside the rockers on a Sierra?

Owners of 2014–2018 GM trucks watch rockers rot from the inside before the frame shows much. Film through the factory holes protects them where water sits.

Is a Sierra different from a Silverado underneath?

No. Same frame, same wax coating, same steel lines. The price category and prep match.

Do you coat Sierra HDs?

Yes. 2500 and 3500 trucks fall in the full-size category; dually rear wheels add time.

My Sierra stays in the Valley except one Flagstaff trip a year. Worth it?

One snow trip coats everything in chloride. A rinse right after and a coat before the trip is the cheap insurance.

ST6 Arizona · Tempe bay

Ready to protect your Sierra? Bring it to Tempe.

Most Sierra owners we see drive I-17 to Flagstaff or Canyon Lake ramps. The bay sits across from Tempe Marketplace at the Loop 101 and 202 interchange; drop off at 10 AM, pick up the same day.

HoursTue–Fri 10am–6pm · Sat 10am–4pm
Call or text(480) 359-7117

Also at the Tempe bay: Ford F-150 undercoating · Chevy Silverado undercoating · Ram 1500 undercoating · RV undercoating

Plan your drop-off
Time
About 6 hours · day drop-off
Tell us
Sierra year, trim and what's bolted underneath
Payment
No deposit · pay after the work
Request a Quote

Tell us about the vehicle. We’ll route it to the right team.

Include the vehicle, the city it’s in and what you want done. The nearest location replies with the right service and an open time.

Request detailsST6 Arizona